add current and simplify calculations

can/can.ino

@@ -2,7 +2,9 @@
 #include <mcp_can.h>
 #include <Wire.h>
 #include <LiquidCrystal_I2C.h>
+#include <SoftwareSerial.h>
 
+SoftwareSerial lora(8, 9); // RX, TX
 LiquidCrystal_I2C lcd(0x27, 20, 4);
 
 #define CAN_CS 10
@@ -10,29 +12,32 @@ MCP_CAN CAN(CAN_CS);
 
 const byte NODE_ID = 0x01;   // Change to your Sevcon node ID
 const unsigned long timing = 500;
+const unsigned long timing_c = 10;
 
 unsigned long previous_time = 0;
 unsigned long current_time = 0;
+unsigned long previous_time_c = 0;
 
 int16_t rpm = 0;
 int16_t ubat = 0;
 int v = 0;
+int u_shunt = 0;
 int ubatr = 0;
+int current = 0;
+int c_max = 0;
+char buffer[50];
+int n = 0;
 
 void setup() {
+  pinMode(5, OUTPUT);
+  pinMode(6, OUTPUT);
+  digitalWrite(5, LOW);
+  digitalWrite(6, LOW);
+  lora.begin(9600);
+
   lcd.init();
   lcd.backlight();
 
-  lcd.setCursor(0, 0);
-  lcd.print("vitesse = ");
-  lcd.print(" ");
-  lcd.print(" km/h  ");
-
-  lcd.setCursor(0, 1);
-  lcd.print("ubat = ");
-  lcd.print("  ");
-  lcd.print(" V  ");
-
   Serial.begin(115200);
 
   while (CAN_OK != CAN.begin(MCP_ANY, CAN_500KBPS, MCP_8MHZ)) {
@@ -60,18 +65,14 @@ void loop() {
         if (len >= 2) {
           rpm = buf[0] | (buf[1] << 8);
           v = rpm * 0.017;
-          Serial.print("Vitesse = ");
+        }
-          Serial.println(v);
-        };
         break;
       }
       case 0x209 : {
         if (len >= 2) {
           ubat = buf[0] | (buf[1] << 8);
           ubatr = ubat / 16;
-          Serial.print("Tension = ");
+        }
-          Serial.println(ubatr);
-        };
         break;
       }
     }
@@ -80,14 +81,51 @@ void loop() {
   current_time = millis();
   if (current_time - previous_time >= timing) {
     previous_time = current_time;
+
     lcd.setCursor(0, 0);
     lcd.print("Vitesse = ");
     lcd.print(v);
     lcd.print(" km/h  ");
+    Serial.print("Vitesse = ");
+    Serial.println(v);
 
     lcd.setCursor(0, 1);
     lcd.print("ubat = ");
     lcd.print(ubatr);
+    lcd.print("/");
+    lcd.print(u_shunt);
     lcd.print(" V  ");
+    Serial.print("Tension = ");
+    Serial.print(ubatr);
+    Serial.print("/");
+    Serial.println(u_shunt);
+
+    lcd.setCursor(0, 2);
+    lcd.print("current = ");
+    lcd.print(current);
+    lcd.print(" A  ");
+    Serial.print("Current = ");
+    Serial.println(current);
+
+    lcd.setCursor(0, 3);
+    lcd.print("current_max = ");
+    lcd.print(c_max);
+    lcd.print(" A ");
+    Serial.print("current max = ");
+    Serial.println(c_max);
+
+    snprintf(buffer, sizeof(buffer), "%d,%d,%d,%d", n, v, ubatr, current);
+    n = n + 1;
+    lora.println(buffer);
+  }
+  if (current_time - previous_time_c >= timing_c) {
+    previous_time_c = current_time;
+
+    current = ((analogRead(A0) * 5 * 27.322) / 1023);
+    if (current > c_max) {
+      c_max = current;
+    };
+
+    u_shunt = ((analogRead(A1) * 5 * 15.701) / 1023);
   }
 }