# I2D_Project_15

For this project you will need to install 2 dependencies

# DHT sensor library

https://github.com/adafruit/DHT-sensor-library

# Adafruit Unified Sensor Driver

https://github.com/adafruit/Adafruit_Sensor

To install the libraries just download the source code in zip and import them in arduino ide

# HC-05 Settings
To use the HC-05 you may need to change its settings, for that you will need to use the AT mode so put a wire between 5V and the key pin on the HC-05 and use the arduino-HC-05-AT.ino upload it then open the serial monitor set it to 9600 baud and BOTH, NL and CR then use the AT commands to set the correct settings